Mechanistic Analysis of Rigid Pavement for Wheel Load Stresses By Finite Element Method Considering Different Sub-Grade with Different Percentage of Metal Fibre
Mohd. Imran Khan1, Ahmad Ali Khan2, Shalini Yadav3
1Mohd. Imran Khan, Civil Engineering Department, Technocrat Institute of Technology, Bhopal Pin Code, 462022, Madhya Pradesh, India.
2Dr. Ahmad Ali Khan, Civil Engineering Department, All Saints College of Engineering, Bhopal, Pin code 462036, Madhya Pradesh, India.
3Dr. Shalini Yadav, Civil Engineering Department, Aisect University, Bhopal Pin code 464993, Madhya Pradesh, India.
Manuscript received on 19 April 2021 | Revised Manuscript received on 08 June 2021 | Manuscript Accepted on 15 November 2021 | Manuscript published on 30 November 2021 | PP: 1-9 | Volume-1 Issue-2, November 2021 | Retrieval Number: 100.1/ijte.A1901051121 | DOI: 10.54105/ijte.A1901.111221
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Published by Lattice Science Publication (LSP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In the present work, analysis of concrete pavements using ANSYS software has been attempted. ANSYS is a finite element method-based software. The concrete slab has been modeled with solid 45 brick element and spring elements for soil. Analysis was carried out for a wide range of load and slab soil combination. The soil as “Winkler type” represented by elastic springs and their stiffness was derived from modulus of sub-grade reaction. The influence of any particular base or sub base on edge stresses was not studied here. The model will be then subjected to number of varying input parameters like the change in the thickness of pavement slab, sub-grade material to winkler foundation, modulus of elasticity by adding metal chips in different percentage like 10%, 20%, 30% and also intensity of loads. It is aimed to compare the stresses of the model study with classical approach of Westergaards and IRC 58- 2002 method. Westergaards equation under estimate edge wheel load stresses when compared with those obtained from ANSYS. For generating the charts, edge loading condition was considered which is critical case for wheel load stresses. Also, it was aimed to compare the results with those given by IRC 58 – 2002 design charts. Design charts were developed in thesis work yield the same value of pavement thickness as that of IRC 58 – 2002 method.
Keywords: Concrete Slab, Winkler Foundation, Interface, Contact, Finite Element Model.
Scope of the Article: Pavement Engineering